Our company is professional for world best selling products-Flux SJ101.
Conforming to: NB/T47018-2011 GB/T5293-1999 F4A2-H08MnA F5A4-H10Mn2
AWS-A5017 F7A2-EM12K F7A4-EH14
Welding flux SJ101 is a kind of fluoride-alkaline-type slag-serial sintered flux, mesh 10-60(2.0-
0.3mm).It has great capacity of sculpture removal, phosphor removal and anti-rust. The technology has
good performance, easy to deslag and with fine appearance of weld, even in the narrow gap of deep
slope entrance. The metal welding seam has good plasto-toughness, with low diffusion of hydrogen and
fine cold and heat crack resistance.
Application:
This flux is alkaline flux, which belongs to the metallurgy neutral, It hardly increase Si and Mn on
weld bead. High impact toughness at low temperature. The flux has excellent welding performance,
excellent slag removal, and good bead appearance. With different welding wire welding a variety of low
alloy structure steel, for example pipe, boiler, pressure vessel, bridges, ship etc.
Horizontal welding of oil storage tanks, ships, bridges, pressure vessels,
penstocks, boilers and structural steels.
Characteristics:
SJ101 assures excellent weld ability, and the welding bead appearance is
beautiful and the slag is easy to remove.
The diffusible hydrogen content in deposited metal is less than 5ml/100g, so it
has very good toughness at low temperature, therefore, crack resistance is
extremely high.
It is suitable for submerged arc twin- wire, tandem and multi- wire welding as
well as for welding with the two- run technique.
Damp flux should be re-dried at 300-350ºC for 2 hours. Rust, grease and
moisture on the element should be removed before welding.
Attentions/Cautions:
1. Flux must be re-dried at 300-350 °C (572-662°F) for 2 hours before welding.
2. Remove all rust, scale, paint and etc., so as to obtain excellent weld material.
3. In the multilayer welding, groove welding of baking welding demand low welding current and speed.
4. Adding new flux regularly in order to avoid causing welding defect and bad welding bead appearance
when using flux again.
Chemical Composition of SJ101( %)
SiO 2 +TiO2 |
CaF 2 |
AI2O 3+MnO |
CaO+MgO |
S |
P |
15-20 |
15-20 |
25-30 |
25-30 |
≤0.05 |
≤0.05 |
(Basicity of the Flux):B|W=1.6~1.8
(Mechanical Performance of the Deposited Metal)
Wires |
Standard Models |
σs
(Mpa) |
σb
(Mpa) |
Akv
(J) |
δ5 |
HO8A
HO8MnA
HO8Mn2MoA |
F4A2-HO8A
F5A4-HO8MnA
F7021-HO8Mn2MoA |
≥340
≥410
≥500 |
≥420
≥490
≥600 |
≥27(-20ºC)
≥27(-40ºC)
≥27(-20ºC) |
≥22%
≥22%
≥17% |
Mechanical properties of the deposited metal |
Wires matched |
Standard models |
Yield point
σs (MPa) |
Tensile Strength
σb(MPa) |
Elongation
δ5(%) |
Impact value
AKV (J) |
AWS EL12 |
F6A0-EL12 |
≥350 |
≥420 |
≥22 |
≥50(0ºC) |
AWS EM12K |
F7A-EM12K |
≥410 |
≥500 |
≥22 |
≥50(0ºC) |
Our Services:
1. Once the confirmation of order, we will try our best to deliver goods as soon as possible.
2. Provide the most competitive price in the market.
3. Have stock, Have a spot, to guarantee the delivery date.
4. The most professional and high quality service.
Our Service:
1. Samples: Samples are available for you. We will send you samples as your requirements.
2. If you have any questions, we can explain to you immediately.
3. We promise we will supply our best quality with factory price.
4. We promise the goods can be delivered on time and will not bring any trouble to you.
5. When you use our products, we can guide you how to use them.
6. We will try our best to service you well as your requirements.
How to contact us?
Mr. Jacky-MIGHTY QINGDAO METAL MATERIALS CO., LTD.
Tel: +86-0532-66010296
Mobile: +86-15764260250
Add: Room 705, Building A, Heda Office Building, NO. 175, Tailiu Road, Shibei Strict, Qingdao, China