Agglomerated flux SJ101G
AWS F7A4-EH14
EQUIV F7A0-EA2-A2
DIN BFB165AC12MHP5
Description:
Agglomerated flux SJ101G is a kind of fluride-alkaline sintered flux, the basicity index is about 1.8. It is shaped as grey, round grains and its size is 2.0-0.45mm(10-40mesh). It can be used with either AC or DC. The wleding wire is connected to the positive elctrode when used with DC. It has stable arc combustion, good slag detachability and good appearance of weld. The weld metal has higher low-temperature impact toughness.
As a peculiar production technique is adopted, the flux possesses better moisture resistance and good strength of grains, which may satisfy the requiements for regular transportation, storage and recycling use in welding. The flux has less specific gravity when it is bulk packed. And it is consumed less in the welding.
Applications:
Match with suitable welding wires(EL12, EM12, , EH14, H08MnMoA, Ho8Mn2MoA), It can be used to weld many types of pipes, made by such as X52, X60, X70, X80 steels etc. It can also be used in multi-layer welding, double-side single-pass welding, multiple-wire welding and narrow-gap submerged arc welding.
Notes for welding:
1. Redry the flux for 2 hours at 300-350º C prior to be used.
2. Some rust, oil, moisture and other impurities must be cleared away from the area to be welded.
Composition of welding flux(%) |
SiO2+TiO2 |
CaO+MgO |
Al2O3+MnO |
CaF2 |
S |
P |
18-25 |
28-35 |
25-30 |
18-25 |
≤0.06 |
≤0.08 |
Agglomerated flux SJ101 Matches with the following wires equivant to the combinations for submerged arc welding:
|
|
Chemical Compostion of Deposited Metal (%) |
Mechanical Properties of Deposited Metal(Standard&Typical) |
|
|
|
C |
Mn |
Si |
S |
P |
Cr |
Ni |
Mo |
Cu |
Yield point ReL(MPa) |
Tensile strength Rm(MPa) |
Elongation A(%) |
Akv Value (J) |
Application |
AWS A5.17 F6A2/EL12 |
Standard |
- |
- |
- |
- |
- |
- |
- |
- |
- |
≥460 |
550-690 |
≥22 |
-20ºC≥27 |
for welding many types of pipes, made by such as X52,X60,X70,X80 steels etc.It can also be used in multi-layer welding , double-side single-pass welding, multiple-wire welding and narrow-gap submerged arc welding. |
Typical |
0.06 |
1.42 |
0.32 |
0.004 |
0.018 |
0.024 |
0.057 |
0.275 |
0.151 |
535 |
590 |
26 |
126 |