Type: | E (Carbon Steel Electrodes/ Low Alloy Steel Electrodes) |
---|---|
Material: | Low Alloy Steel |
Diameter: | 2.5mm,3.2mm,4.0mm,5.0mm |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
low alloy steel aws a5.5 e10015-d2 e8015-g permanent welding electrodes/300-450mm length electrode welding rod
Low alloy steel electrode is low hydrogen iron powder type,low alloy welding rod, For Welding of Low Alloy Steels Structure of Same Grade.
Our products are included AWS E7015-C2L(2), E9015-G, E8015-G, E9016-C1(3), E9016-D1, E10015-D2, E10015-G, E10015-G(2), E12015-G, E12015-G(2).
Application
Low alloy steel welding electrode AWS E8015-G mainly used in welding of medium carbon steel structures and low alloy steel structures.
Instruction
1. The oil stains and rust on the welding should be cleared away.
2. Pls use stainless steel brush cleaning bead to avoid iron mied affacting weld quality.
3. Pls Dry 60 minutes at 300-350ºC before welding.
4. Take out a small quantity into 100-150ºC drying cylinder, when operation.
5. Do not carry electrode over half-day using quantities.
6.When swing the electrode, swing width should be within 2.5 times of the electrode diameter.
7. Try to keep short arc and low current, in order to reduce creazing and improve toughness.
AWS E9018-B3 is a kind of low hydrogen sodium type welding electrode, suitable for fabricating equipments of chemical and petroleum industries as well as high temperature, high pressure pipes, which is fabricated by Cr2.5Mo low alloy and work temperature lower than 550º C
Chemical Composition of Deposited Metal(%) | ||||||
C | Mn | Si | S | P | Cr | Mo |
0.05-0.12 | ≤0.90 | ≤0.80 | ≤0.030 | ≤0.030 | 2.00-2.50 | 0.90-1.20 |
0.080 | 0.75 | 0.24 | 0.010 | 0.012 | 2.34 | 1.14 |
Typical Mechanical Properties of Deposited Metal | ||||||
Yield Point Rel(Mpa) | Tensile Stregth Rm(Mpa) | Elongation A(%) | AKv Value (J) | |||
≥530 | ≥620 | ≥17 | - | |||
580 | 680 | 20 | 27ºC 180 |
Package:
Suppliers with verified business licenses